Instructions - CV Quick release system to suit each model Posted on 30 Nov 10:11
For the video of the install please click the link below:
This is a video of the install on a 2022 Dmax/BT50 chassis we have in our Munji NPD Department, this is to show the basic install process which is the same for each model beside the obvious differences of suspension set up. But in all its basically the same procedure.
Hole Saw Sizes:
- Holden TF R&R7 Rodeo (1988-2003) - 3.5" / 89mm Hole Saw
- Holden Ra/Ra7/RC Colorado & Isuzu D-max (ISUZU Series 1 = 2003-2012) - 3.5" / 89mm Hole Saw
- Holden RG Colorado & Isuzu D-max (ISUZU Series 2&3 = 2012-2020) - 3.5" / 89mm Hole Saw
- Mazda BT-50 & Isuzu D-max (ISUZU Series 4 = 2020 Onwards - 4JJ3 Engine) - 3" / 76mm Hole Saw
Any questions please feel free to call Jared
0404797034