Munji 4x4 Accessories Pty Ltd

Contact Us
Jared's Mobile: 0404 797 034
Order Enquires: 0756 708 147

Jared's Mobile: 0404 797 034 | Order Enquires: 0756 708 147

X

Vent to Atmosphere Chassis Kit (RA, RA7, RC, and early D-Max)-19mm hole

SKU: I-S1-VTACF

$155.00

or make 4 interest‐free payments of $38.75 fortnightly with Afterpay Moreinfo

Let me know when it's back in stock!

Give us a few of your details and we'll let you know when this product is back in stock.

What is this?

This is a kit that is the only 100% removal of blowby crankcase pressure and oil from your intake and no servicing needed!!

There is NO risk of pressure build up from a restrictive filter and no draining needed. 

With the gasses being evenly pumped into both chassis rails you will not only get no dripping but you will also get an even coating (very thin) of oil throughout the entire chassis rails. This is one of the best rust preventions you can have on any car that is exposed to the atmosphere not to forget for those who drive on salted roads.

Normally vent to atmosphere is a pipe to the ground... there are many bad things there eg:

  • Oil vapour on the road is not kind to motorbike riders or other vehicles
  • Oil vapour on the road is not kind on the road surface in general
  • Can be easily seen venting into the air

This kit comes with all that is needed and is vehicle specific. 

These kits will include:

  • Specific chassis fittings made to fit original holes with no cutting needed.

- Two sizes available depending on where along the rail you want to introduce the gas. For this model, the ~19mm fitting is recommended as it mounts closest to the motor for the least hose length.

  • Y piece to distribute to both rails
  • T piece to tap into the original breather (one blocked end to make it look "neater"
  • Silicone pipe to connect all the fittings neatly.
  • All fittings are billet alloy, also the silicone parts supplied are black for a "neater" look...

What are the b

N.B. Vent to atmosphere modifications are not legal.

What are the benefits?

100% removal of venting gasses and oil from intake system.

What vehicles does this suit?

-Holden RA Rodeo (2003-2006)

- Holden RA7 Rodeo (2007-2008)

- Holden RC Colorado (2008-2012)

- Isuzu D-Max (2008-2012)

Installation

Tools required –  screwdriver / degreaser / rags / allan key set / knife

Installation Time - Approximately 30 minutes

Difficulty – Do it yourself, basic tool knowledge required / Detailed installation guide provided, basic tool knowledge required 

Postage

Flat rate postage applies.

N.B. * Venting to atmosphere is not legal.