This is another option to the Steering Bearing Plate. The Bearing Plate is easier to fit and gives more closure of the slip spline. But you only need one or the other, NOT BOTH.

This is a new design modification to correct the steering issues that are caused as a result of installing a body lift kit (2'). This SC Plate is designed to correct steering shaft geometry, clearance from the turbo and length of the slip spline following body lift.

Installation

All the original nuts and bolts are reused.

N.B: Do not play with the steering wheel as over spinning will while not connected will cause the breakage of the clock spring.

• Minimal mechanical knowledge
• Tools required:
  • 12mm Socket
  • 10mm Spanner
  • 12mm Spanner
  • (Optional) Silicone sealant
• View our installation guide here!