Intercooler Hard Pipe Upgrade (Isuzu D-Max & Mazda BT-50 2020 onwards and MUX 2021 onwards (Only - 4JJ3)
or make 4 interest‐free payments of $47.50 fortnightly with Moreinfo
What is this?
Munji custom designed alloy intercooler pipes, being a direct replacement for the factory rubber hoses. We have made us of a lower silicone angle to allow the movement of the engine to be absorbed through rather than risking breaking off the plastic MAF pipe from the intake manifold. This is an important design feature knowing these engine do float around on the mounts more than most.
What are the benefits?
The original rubber intercooler pipes expand under boost, which can cause lag and also fatigue over time which can rupture.
The hard pipe upgrade:-
- Aesthetically pleasing;
- Is stronger, will not expand under boost or fatigue;
- Has built-in barb fitting for attaching a boost gauge; and
- Comes with silicon joiners, which are more durable than the original rubber joiners, and will withstand must higher boost levels.
All these benefits suit a standard to a highly modified vehicle, with standard front mount intercooler.
- No Boost Fitting; or
- 1/8 npt 6mm angled barb.
N.B. All kits come with a female welded fitting with a 1/8 NPT thread. This means you can order the "No Boost fitting" which is fitted with a blank grub screw and change back anytime if you wish to get tuned or for boost referance.
Tools required - Small socket set and cleaning rag.
Installation Time - Approximately 20 minutes.
Difficulty - Do it yourself, basic tool knowledge required
Standard postage Australia wide included in price.