What is this?

A pair of Munji Extended Mudflaps to replace the original rubber mudflaps, and are the same length as factory. These mudflaps are much lower profile then the original rubber mudflaps, giving more tyre clearance in the wheel arch, and the extended width will help cover the tyre poke when fitting bigger offsets. They will also clean up any pre-existing gaurd chopping and hide it all giving a neat finish. They fit using the original mudflap holes, and can be fitted using the original mudflap bolts, however Countersunk M6 bolts and rivnuts are provided and are the recommended mounting method as they sit flush with the mudflap, giving more tyre clearance.

Construction

• Mud Flaps are CNC'd out of High-density Polyethylene (HDPE).
• Black in colour to suit the "Original Look".
• This a UV stable material and will not deteriorate in the sun.
• HDPE is a thermoplastic, which means if for some reason it is out of shape you can simply leave the part out in the sun on a hot day and it will be easy to flatten out again.

What are the benefits?

These Mudflaps are designed to clear bigger tyres with their folded design, and the extended width will help cover the tyre poke when fitting bigger offsets. In case of a big impact directly onto the mudflap, the countersunk bolts are designed to pull through the mounting holes on the mudflap, to try save the guard panel from damage. You must cut your guard and flare to fit these mudflaps, and give tyre clearance.

Options Available

Width

Three different widths are available for purchase:-

1. 25mm Extension - Edge of Mudflap will poke ~25mm past the flare (Suits tyres that have sidewall poke only)

2. 50mm Extension - Edge of Mudflap will poke ~50mm past the flare 

3. BIG BOY 75mm Extension - Edge of Mudflap will poke ~75mm past the flare

Logo Style

1. Standard Munji Logo Sticker

2. Slanted Munji Logo Sticker

3. Laser Etched Munji Logo (Please note picture may not depict mudflap variation of this model)

Hardware

The Inner Guards come with Countersunk Bolts and Rivnuts (please note this is the recommended mounting system, however, you will require a Rivnut crimper) 

What vehicles does this suit?

Isuzu D-Max 2008-2012

Holden Ra7 Rodeo 2007-2012

Installation

Tools required – Allan key / Drill / Rivnut Crimper

Optional tools required (depending on hardware selected) – Rivnut Crimper for rivnut hardware option

Installation Time - Approximately 30 minutes for initial install of Rivnuts

Difficulty –Do it yourself, basic tool knowledge required 

Postage

Flat rate postage applies.

N.B. Please note we cannot send to PO Boxes due to size. Please contact us directly if you require priority fulfillment/express shipping (not available on all inner guards).