What is this?

A pair of Munji Reinforced Inner Guards to replace the original rubber flaps that are in located within the wheel arch.

The original rubber Inner Guards will no longer fit after a 1” or 2” Body Lift is installed.

Construction

• Inner Guards are now CNC'd out of High-density Polyethylene (HDPE).
• Black in colour to suit the "Original Look".
• This a UV stable material and will not deteriorate in the sun.
• HDPE is a thermoplastic, which means if for some reason it is out of shape you can simply leave the part out in the sun on a hot day and it will be easy to flatten out again.

What are the benefits?

The replacement Inner Guards provide protection from debris to your engine components.

Options Available

Heights

Three (3) different heights are available for purchase:-

1. Standard height (no body lift) (This applies for suspension lifts as well)

2. 1” Body Lift

3. 2” Body Lift

Hardware

The Inner Guards come with your chosen hardware, either:-

A. Bolts, anodized washers and Rivnuts (please note this is the recommended mounting system, however, you will require a Rivnut crimper)

B. Bolts, anodized washers and Rubber Thread Inserts 

Installation

Tools required – Allan key / Drill

Optional tools required (depending on hardware selected) – Rivnut Crimper for rivnut hardware option

Installation Time - Approximately 30 minutes for initial install of Rivnuts

Difficulty –Do it yourself, basic tool knowledge required 

Postage

Flat rate postage applies.

N.B. Inner Guards are unable to be sent via express post due to size.