Munji 4x4 Accessories Pty Ltd

Contact Us
Jared's Mobile: 0404 797 034
Order Enquires: 0756 708 147

Jared's Mobile: 0404 797 034 | Order Enquires: 0756 708 147

X

2" Body Lift Package (Isuzu D-Max and Mazda BT-50 2020 to Current - 4JJ3) - 2" Body Lift, Steering Shaft Extension Clamp (Pre order)

SKU:

$530.00

FREE STANDARD SHIPPING AUSTRALIA WIDE

or make 4 interest‐free payments of $132.50 fortnightly with Afterpay Moreinfo

Let me know when it's back in stock!

Give us a few of your details and we'll let you know when this product is back in stock.

Steering Shaft Extension Clamp Pre Order!!

 

WHAT IS INCLUDED IN THIS PACKAGE? 

1. 2” BODY LIFT KIT

What is this?

A Vehicle Body Lift kit, all blocks, nuts, bolts, washers etc needed are included in the kit.

The Munji Performance kit offers all the blocks to lift the cabin and tub as well as additional load blocks, which are not normally offered in other kits. These extra blocks are fitted under the tub. 

The blocks in our kits are also much larger in diameter than others on the market at the moment to provide better support and are the same diameter as the standard mounts.

Our Body Lift Kits meet all compliance requirements for a modification plate. However, please note that body lifts are not legal in ALL Australian States and you will need to make enquiries to ensure a body lift is

What are the benefits?

By lifting the body you have extra room to gain access for servicing, more tyre clearance, greater approach and departure angle clearances (whilst four wheel driving), looks f#$king cool.

2. STEERING SHAFT EXTENSION CLAMP

What is this?

A direct replacement steering shaft extension clamp to solve the steering issues caused by installing a body lift.

What are the benefits?

When a body lift if installed, the steering shaft needs to be extended. This is because the lift causes the steering shaft to open to an unsafe point. This can result in breakage of the link between the two steering shafts, resulting in the loss of steering.

The Munji Steering Shaft Extension Clamp has been designed off the factory clamp join and as such it retains the in-built failsafe which is the bolt lock out point. Even if the bolt is loosened the clamp will not slide out.  

The clamp is made from one piece billet steel. The part is also E-Coated to help protect against corrosion. The factory original clamp is also made from Steel.

 

WHAT MODELS DOES THIS SUIT?

Body lift kits are available for the following vehicles:-

  1. Isuzu D-Max - 2020 to Current - 4JJ3
  2. Mazda BT-50 2020 to Current - 4JJ3

INSTALLATION

Tools required – small socket set / pry bar / WD40 / rags

Installation Time - Approximately Two (2) hours

Difficulty –Detailed installation guide provided, basic tool knowledge required

POSTAGE

Standard postage Australia wide included in price

Customer Reviews

Based on 1 review Write a review