Munji 4x4 Accessories Pty Ltd

Contact Us
Jared's Mobile: 0404 797 034
Order Enquires: 0756 708 147

Jared's Mobile: 0404 797 034 | Order Enquires: 0756 708 147


2" Body Lift Kit (Mazda BT-50 / Ford Ranger PK)




or make 4 interest‐free payments of $75.00 fortnightly with Afterpay Moreinfo

Let me know when it's back in stock!

Give us a few of your details and we'll let you know when this product is back in stock.

What is this?

A Vehicle Body Lift kit, all blocks, nuts, bolts, washers etc needed are included in the kit.

The Munji Performance kit offers all the blocks to lift the cabin and tub as well as additional load blocks, which are not normally offered in other kits. These extra blocks are fitted under the tub. 

The blocks in our kits are also much larger in diameter than others on the market at the moment to provide better support and are the same diameter as the standard mounts.

Our Body Lift Kits meet all compliance requirements for modification plates. However, please note that body lifts are not legal in ALL Australian States and you will need to make enquiries to ensure a body lift is.

NOTE: It is recommended to purchase and fit the MUNJI Steering Shaft Extension Clamp, MUNJI Replacement Intake Pipe and MUNJI Replacement Lower Radiator hose if you are fitting a 2" body lift, as the factory components will not work after a body lift. If you have a Manual gearbox, it is also recommended to fit the MUNJI Gearbox Spacer to allow for shifting of gears.

MUNJI Steering Shaft Extension Clamp

MUNJI Replacement Intake Pipe

MUNJI Replacement Lower Radiator Hose

MUNJI Gearbox Spacer

What are the benefits?

By lifting the body you have extra room to gain access for servicing, more tyre clearance, greater approach and departure angle clearances (whilst four wheel driving), looks f#$king cool.

Options Available

2" (1" available under separate listing)

What vehicles does this suit?

Body lift kits are available for the following vehicles:-

  1. Mazda BT-50 (2006-2011)
  2. Ford Ranger PK (2006-2011)


Tools required – small socket set / pry bar / jack / WD40 / rags

Installation Time - Approximately 2 hours

Difficulty –Detailed installation guide provided, basic tool knowledge required


Standard postage Australia wide included in price