Munji Offset Diff Drop Kit
or make 4 interest‐free payments of $22.50 fortnightly with Moreinfo
What is this?
25mm diff drop.
The blocks are machined from HDPE rod with a much larger footprint than other similar kits available. The custom Munji washers are made from alloy to be part of the drop itself and displace the load over the entire HDPE blocks.
The Munji Offset Diff Drop kit uses 55mm diameter material for the blocks to prevent overstretching the rubber mounts. The alloy Munji washers are 55mm diameter as well.
We have used HDPE as our material of choice because of its ability to resists wear and effects by the elements. Also by being a composite material, it will not cause any accelerated corrosion/rust to eat away the steel bolts like alloys can. HDPE is a very strong material, for the body lift blocks of 65mm diameter, they will withstand a minimum of 5-tonne weight over that area before permanent deformation occurs.
What are the benefits?
Lowers the diff, which reduces the CV (continual velocity joint) angle, which lessens wear and reduces the chance of breaking the CV cup.
What vehicles does this suit?
- RC Colorado
- Early D-Max – 2009 to 2012
Tools required – small socket set / pry bar / WD40 / rags
Installation Time - Approximately 30 minutes
Difficulty –Detailed installation guide provided, basic tool knowledge required
Standard postage Australia wide included in price