Munji 4x4 Accessories Pty Ltd

Contact Us
Jared's Mobile: 0404 797 034
Order Enquires: 0756 708 147

Jared's Mobile: 0404 797 034 | Order Enquires: 0756 708 147

X

Intercooler Hard Pipe Upgrade **SECONDS / DAMAGED** (Isuzu D-Max & Mazda BT-50 2020 onwards and MUX 2021 onwards (Only - 4JJ3)

SKU:

$170.00

FREE STANDARD SHIPPING AUSTRALIA WIDE

or make 4 interest‐free payments of $42.50 fortnightly with Afterpay Moreinfo

OUT OF STOCK

KEEP ME UPDATED

Let me know when it's back in stock!

Give us a few of your details and we'll let you know when this product is back in stock.

IMPORTANT NOTE - The damage to these intercooler hard pipes vary from slight crimp marks from mandrel bender, light scratches, dents, slight ripples in bend (Does not impact seal quality)

Reduced price offered on these imperfect hard pipes. 

NOT AVAILABLE FOR REFUND - Final Sale

Photographs are examples of damage, damage varies slightly to each pipe. By making purchase you accept the pipes are not perfect and understand slight defects as shown in photographs and you are unable to seek a refund of the pipes.

 

This kit comes with replacement silicone joiners that may need to be trimmed down to fit. 

What is this?

Munji custom designed alloy intercooler pipes, being a direct replacement for the factory rubber hoses. We have made use of a lower silicone angle to allow the movement of the engine to be absorbed through rather than risking breaking off the plastic MAF pipe from the intake manifold. This is an important design feature knowing these engines do float around on the mounts more than most.

What are the benefits?

The original rubber intercooler pipes expand under boost, which can cause lag and also fatigue over time which can rupture.

The hard pipe upgrade:-

  1. Aesthetically pleasing;
  2. Is stronger, will not expand under boost or fatigue;
  3. Has built-in barb fitting for attaching a boost gauge; and
  4. Comes with silicon joiners, which are more durable than the original rubber joiners, and will withstand must higher boost levels.

All these benefits suit a standard to a highly modified vehicle, with a standard front mount intercooler.

Options Available

Colour

High polish

Black

Brush Silver

Boost Fitting

  1. No Boost Fitting; or
  2. 1/8 npt 6mm angled barb.

N.B. All kits come with a female welded fitting with a 1/8 NPT thread. This means you can order the "No Boost fitting" which is fitted with a blank grub screw and change back anytime if you wish to get tuned or for boost reference. 

Installation

Tools required - Small socket set and cleaning rag.

Installation Time - Approximately 20 minutes.

Difficulty - Do it yourself, basic tool knowledge required 

Postage

Standard postage Australia wide included in the price.

Customer Reviews

No reviews yet Write a review